CABV/600 G

Our machine mod. CABV/600 G allows the homogeneous thickness calibration of granite strips by means of diamond-mobile rolls. Its structure is composed of a base made of electro-welded normalized, grinded steel and of a mobile bridge made of stiffened steel. The iron operating heads are positioned on the bridge. High stability, accuracy of processing and absence of vibration are guaranteed. The mechanical and electrical components of the machine guarantee high accuracy and reliability even if used till high stress. All the feeding pipes, the nozzles and the protection casings are dimensioned to supply an adequate water inflow, for a good dressing of the tools during the processing phases, a good quality of cut, and a long tool life. The machine is supplied with grommets to lift the whole structure, while its non-deformability is guaranteed. The switch board is built with steel plate, 15/10 thickness, painted with RAL7032 epoxy paint, with IP 55 protection level. To guarantee the operator’s safety, an insulated transformer is installed inside for voltage 380V and output 48V for all driving mechanisms. All the motor protective devices (fuses, circuit breakers and thermal relays) are dimensioned for each single motor to intervene in case of anomaly to protect it.

       - cylinder useful length for application of diamond

         roll (or discs) mm 200

       - bridge movement motor power kW 1,1

       - calibrating head motor power kW 15

       - calibrating unit up-down motor power kW 0,18

       - displayed calibrating units up-down

       - useful grinding width mm 620

       - maximum thickness of material to be calibrated mm 60

       - belt forwarding motor power kW 1,1

       - displayed belt forwarding speed

       - belt speed electronic adjustment