Marble Tile Combined Calibrating-Polishing Machine LCBV/600 M
The machine is suitable to grind and polish strips of marble. The welded structure of the machine is composed by a normalized, ground base made of electro-welded steel, by a fixed bridge where the calibrating heads are installed and by a moving bridge where the operating heads made of cast iron are installed. We guarantee high steadiness, accuracy of working and absence of vibrations. The mechanical and electrical components of the machine guarantee high accuracy and reliability, too, even if used till high stress. The machine is supplied with parts manually lubricated according to the maintenance plans given to the customer. The conveyor belt is nonskid and covered with rubber. All linear axis are executed with big guides. Some timing cases made of inox steel protect them. All the mechanical guides can be adjusted without clearance. All the water supply pipes, the nozzle and the plate casings are dimensioned in such a way that they guarantee the water flow for a good dressing of the cutting tool during the processing phases, a good quality of cut and a long tool life. The machine has been provided with lifting or fixing grommets. They allow, together with ropes and lifting hooks, to lift the whole structure or the main components. The non-deformability of the parts is guaranteed during the unloading operation. The switch board is made of sheet steel, thickness 15/10 mm, painted with RAL 7032 paint, IP55 protection level.
to 4 units with diamond head + 12 units with polishing head
bridge motion
- maximum useful working width mm 620
- maximum workable thickness mm 100
- calibrating head motor power kW 22
- up-down calibrating head motor power kW 0,18
- displayed calibrating head up-down
- polishing plate diameter mm 450
- number of sectors type
- polishing head motor power kW 7,5
- bridge motion motor power kW 1,5
- belt forwarding motor power kW 1,5
- displayed belt forwarding speed m/min min. 1 - max. 5
- belt speed electronic adjustment
- material presence computerization
- abrasive end signaling device