FLBV/700-450 MG

This machine allows to process (cut) slabs of marble and granite by means of a diamond disc cooled with water. The welded structure of the machine is at breast of technical progress and guarantees high steadiness, accuracy of working and absence of vibration. The turning table is manually moved and can be fixed with accuracy at every angular position, where it is possible to read the angular degree. The customer has to arrange for the working surface covering of the table. The polishing spindle is moved by a motor 5,5 kW. It is possible to install on the spindle an alluminium plate Ø 450 with seven Frankfurt sectors to polish slabs of marble (included in the supply), or one head Ø 400 with four small plates to polish granite slabs (optional on request).The switch board is made of sheet steel, thickness 15/10 mm, painted with RAL 7032 paint, IP55 protection level. The supplying unit is composed by a magnetothermic switch with shutter locking to avoid the opening of the switch board with tension. It can be restored after opening the shutter, in case of maintenance. To guarantee the operator’s safety, an insulation transformer is installed inside for voltage 380V and output 48V for all the driving mechanisms.

        table visualized angular rotation - precision 0,01

       - unit of cut double speed motor power kW 12/18

       - longitudinal movement motor power kW 1,1

       - transversal movement motor power kW 0,75

       - vertical disc up-down motor power kW 0,75

       - polishing head motor power kW 5,5

       - longitudinal useful cut mm 3500

       - transversal useful cut mm 3500

       - variable inclination  cut from 0-45°

       - maximum cutting thickness marble mm 200

         granite mm 120

       - disc diameter mm min. 450 - max. 700

       - marble polishing plate diameter mm 450

       - marble abrasive sectors n 7

       - maximum overall dimensions mm 5500x4300

       - 360° rotating table dimensions mm 3200x2000

       - “touch screen” multi-page graphic terminal

          to set a single measure

       - cable controlled emergency stop

       - water consumption l/min 30

       - air consumption at 6 bar /min 40

       - total installed power kW 26,1