Automatic Cross Cutting Machine IBV/600 M 2

This machine enables to square the first and final parts of big thickness strips and the cut at variable measures thanks to its two independent cutting units. The grinded table with belt is fixed on the structure made of electro-welded steel. The table carries a special rubber belt and it is resistant to wear. A special anticorrosive treatment is effected. The switch board is made of sheet steel, thickness 15/10 mm, painted with RAL 7032 paint, IP 55 protection level. The supplying unit is composed by a magnetothermic switch with shutter locking to avoid the opening of the switch board with tension. It can be restored after opening the shutter, in case of maintenance.

2 units of cut

independent units of work

- length of table with motorized belt mm 4000

- useful cut width mm 610

- maximum workable thickness marble mm 100

granite mm 40

- diamond discs diameter mm 450

- maximum distance between discs mm 650

- minimum distance between discs mm 250

- cutting unit motor power kW 11x2

- belt forwarding motor power kW 1,5

- cutting unit forwarding motor power kW 0,55

- cutting speed electronic adjustment by inverter

- digital instrument with possibility of repetition

of 1 single measure of cut

- motorized positioning of cutting units

- belt speed electronic adjustment

- disc motor number of revolutions marble-granite rpm 1450

- water consumption l/min 20

- air consumption at 6 bar l/min 20

- total installed power kW 24,5

Optional:

- programme of cut on “touch screen” with possibility

of setting 9 measures

- visualization of cutting units positioning on “touch screen”